Rinehart Slip-ons help....

[Designflaw]

Bought some slip ons to get through the summer, and they are anything but slip on.

Working on the right side, needed some persuasion. Now it needs a half inch twist and is not budging. Thought about taking it off and trying again and... not budging. I can't persuade it off the same as on which was 2x and malot.

So, how best do I resolve this, strap wrenches? If it has to come off, how best to knock it back off?

How do I help the other side move easier?

Sent from my SM-G955U using Tapatalk

 

[JokerToker]

If you havent sprayed the clamping end down with lubricant then you need to do that first..then patience. A rocking and rolling motion will help to open it up a bit.

 

[fishin1789]

I put lowering blocks on a friends 2014 and had the same issue with his Rinehart slip-ons. I used PB Blaster spray to help them slide off. That, and two people twisting and pulling! Make sure you clean the carbon from inside of the pipes before putting them back on!

 

[Designflaw]

Thanks guys

Sent from my SM-G955U using Tapatalk

 

[El Chapo]

This may sound like a stupid question but what year are the rineharts for ?

 

[Designflaw]

This may sound like a stupid question but what year are the rineharts for ?

M8's stock header