Factory passing lamp kit. 69818-06

[Jordan1200]

Can anybody tell me what crimp to use
For Terminal Socket #20-16AWG
Part # 73191-96

https://goo.gl/images/37LMHA

and 4 way housing 73154-96Bk
I want to do it correctly but not spend a fortune on the tool if possible.
Any suggestions on a resonable tool?


Sent from my SM-G930W8 using Tapatalk

 

[SGBart]

I have passing lights on my FLSS and not on my FLHXS. I just used a pair of needle nose pliers to do mine. I took my time to make sure each connector/connection was tight with no play or damage. I was tested how well I did when I was putting "fangs" on my FLSS and the passing light assembly dropped and everything was suspended by the wires. I was mad at myself that maybe now one of the wires was damaged. But I checked the lights and everything was fine, I went back to look at the wires and they were still in great shape, no damage. So it is possible to crimp with a pair of pliers.... of course YMMV....

 

[Jordan1200]

Installed along with the crashbar fog lights

Sent from my SM-G930W8 using Tapatalk